Najobľúbenejšie z kategórie
Popis
Keyestudio CAN-BUS Shield je špeciálne navrhnutý pre vývojové dosky Arduino. Obsahuje riadiaci čip MCP2515, ktorým môžete realizovať dátovú komunikáciu medzi zariadeniami alebo riadenie dát na zbernici CAN-BUS.
Je kompatibilný so štandardným rozhraním Arduino UNO. Dá sa perfektne prispôsobiť k vývojovým doskám ako je Arduino UNO a Leonardo.
Shield používa konektor DB9, takže si môžete následne zvoliť rozhranie podľa svojich potrieb.
Dodáva sa tiež so slotom na kartu MicroSD, takže môžete priamo použiť kartu MicroSD na ukladanie údajov.
Fotky produktu







Technické údaje
- Prevádzkové napätie: DC 5V
- Čip: MCP2515
- Rozmery: 66mm x 54mm x 28mm
- Hmotnosť: 24g
- Podporujte napájanie cez základnú dosku Arduino alebo konektor DB9
- Podpora ukladania dát na SD kartu
Zdroje
Knižnica a testovací kód: https://drive.google.com/open?id=1vzMTO0OgvUjdv7L3ClCY9B-2jQdhPmGt

The CAN shield is well made. BUT it doesn't work with the normal OBD2 to DB9 cables (like from Spark Fun) It uses the other type where: DB9 pins 3+6 are ground, 2 - CAN Low, 7 CAN High, 9 - Battery (12v)

Teste a venier

Solid and high quality, nice package. Came ~ 3 weeks.

Quartz for 16 MHz, assembled working canhacker. The board is executed very qualitatively!

Good

Using to read the CAN Bus signals of steering wheel radio controls. Had issues with reading the SDCard tried multiple cards finally found a 1GB SanDisk card formated FAT16 that worked. 512MB and 2GB didn't work same brand. Change SDCard sketches to Pin 9 (default 4) Some say that you should have a 3v3 regulator on the board to support SDCards this board doesn't have one which is powered direct from the UNO 3v3 supply.

Great packaging and quality. Must have for CAN enthusiasts.

Quality Part, fast delivery.

AAAA++++

The product looks better in the photo but still performs its function


ок

Corresponds to the description

must still start facking the can-bus network on my 2001 golf IV but so far so good. relatively fast delivery.

Good

ok

Arrived within a month without damage. Everything is packed very well. Thank you!

Received Ok. For now I 've used it to turn on a tachometer using only pin CAN-H and it works properly. Tested with an Arduino one. Happy with the product.

Excellent store. Item took a bit long with customs and seller extended protection time. Thanks!

Thank you very much

Very serious store fast shipping and very good material 10 ++++

Great product and very fast delivery :) RECOMMENDED THIS SELLER AAAAA+++++

Everything is OK

fast delivery, good packing, not yet used
Shipping Company | Shipping Cost | Estimated Delivery Time |
---|---|---|
![]() |
3 - 7 days | |
![]() |
3 - 7 days | |
![]() |
5 - 14 days | |
Post Air Mail | Free Shipping | 15 - 45 days |
Return Policy | If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller. N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion. |
---|---|
Seller Service | On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe). |
Most Popular from Category

Keyestudio CAN-BUS Shield MCP2515 (kompatibilné s Arduinom)
0.00

Keyestudio W5100 Ethernet Shield (kompatibilné s Arduinom)
47.36

Keyestudio SIM800C GPRS GSM Shield (kompatibilné s Arduinom)
0.00

Keyestudio Multi-purpose Shield V2 (kompatibilné s Arduinom)
0.00

Keyestudio 16-channel Servo Motor Drive Shield (kompatibilné s Arduinom)
0.00

Keyestudio Multi-purpose Shield V1 (kompatibilné s Arduinom)
0.00
online shopping, buying directly from manufacturers?
- Go to Alibaba.com and enter the wanted item into search field.
- Having made your choice, click "Contact supplier" button on the right
- On the next page enter your request and click "Send" button.
- Upon clicking you will be asked to get registered. Do it and wait for the reply.